Black wheels for new Audi SQ5
Wheel Tuning with Corniche Challenge
Some models of Audis new SUV SQ5 are equipped with 21" stock tires in sizes 255/40 R 21. What could be more reasonable than to swap the stock alloy wheels with wider or lighter wheels from Swiss manufacturer Corniche? On this car we put matt black Corniche Challenge in 9x21 with stock tyre size 255/40 R 21. For the perfect stance we added two pairs of SCC wheel spacers and a set of lowering springs.
- Go to the wheels:
- Go to the spacers:
- Go to the suspensions:

K-Sport Performance Big Brake Kits
Available with 6 or 8 Pistons
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required. With our new online configuration tool you can config and order your individual setup with just a few klicks.
- Start shopping here:

Wiechers Strut braces
New in our Onlineshop
A strut brace - also called strut bar - not only enhances the appearance of the engine bay but provides lateral support to the top of the struts, thus preventing flexing and change of chassis geometry during hard cornering, thereby improving stability, roadholding and "feel".
With the RACINGLINE label Wiechers offers you a well-selected range of strut bars in an ultra-high quality edition.
Please visit our onlineshop for details and prices.

Black is beautiful
BBS CH-R wheels for Volkswagen Scirocco
Now TUNERSHOP offers the new BBS CH-R Challenge alloy wheel for all Volkswagens Scirocco models. This car has them in size 9.5x19 with 235-35-19 Vredestein Sessanta tires all around. Wheel Technology by BBS: CH-R - One Piece Counter Pressure Cast Wheel with Flow-formed rim - Back-milled spoke area - Featuring stainless steel rim protector - Weight optimized by FEM analysis
- Klick here to start shopping:

BBS wheels now available through TUNERSHOP
All wheels from the legendary BBS brand with free shipping!
We are proud to announce that we are an official BBS dealer and worldwide distributor now. Please visit the wheel section on our websites and find the brand new designs BBS CH-R Challenge, SV, CX-R and RX-R. Outer lips and replacement parts like bolts and nuts can be found in our wheel accessorie section.
- Go to the BBS overview:
- Go to wheel accessories:
- Start shopping:

TUNERSHOP wheel & tire packages
For your driving pleasure

TUNERSHOP wheel & tire packages are the best choice for your driving pleasure. We use state of the art mounting and balancing machines.
Watch the video for details.

Made in Germany

TRACER coilover kits offer the possibility to adjust the desired lowering accurate to a millimeter for the sporty ambitioned driver. We offer sporty handling and ideal performance in combination with the maximium lowering.

You have the possibility to adjust the height by tuning the spring perch individual. The parallel matching of sportiness, comfort and safety offer an perfect setup.

- High Quality at reasonable prices
- individual adjustment of the height
- high quality components and (German) TÜV Certificate

TRACER = Made in Germany
- Go to the TRACER coilovers

TRACER air suspensions
Now available through TUNERSHOP
For luxury cars, sports cars and SUV equipped with air suspension-systems we developed an electronic blackbox for suspension-tuning and lowering. The mechanics and the onboard level-control by switch or menue remain untouched. No error occurs in the electronic diagnosis. The standard drop is 30mm for the front and 20mm for the rear (for SUV 40/30mm) After installation a fine-tuning of +/- 20mm can be made.

To keep the suspension comfort, a speed-controled regulation reduces the lowering while driving. The TRACER lowering module may be removed at any time within minutes.

The TRACER lowering module comes as an electronic blackbox incl. wire harness, mounting-instruction and German TÜV-certificate.

TRACER = Made in Germany!
- Please klick here for details:

Now TUNERSHOP offers a unique wheel and tire combination for Audis supersports model R8. The 3pcs Oxigin Lexor wheels are hand made in Germany. They come with a stainless steel outer lip and match the Audi colour code if desired.
The specs on this setup:
Front 20x9 w. 235-30-20 Dunlop Sport Maxx
Rear 20x11 w. 305-25-20 Dunlop Sport Maxx
Prices starts from $7950

Chromewheels for Corvette
US Alloys wheels in chrome, black polished and silver polished
Now available through TUNERSHOP. US Alloy wheels with specs for Corvette C5:

8,5x18 ET40 mit 245-40-18 Front
9,5x19 ET40 mit 275-35-19 Rear


8,5x19 ET40 mit 245-35-19 Front
9,5x19 ET40 mit 275-35-19 Rear

The wheels are available in chrome, black polished and silver polished.
- Go to the Wheels in our Shop

TUNERSHOP Wheel Accessoires
Outer lips, barrels and bolts for split rims
Alloy wheels are one of the most important facets of any vehicle. If a problem occurs you certainly want to sort it out - without a doubt.

If you've ever lost a center cap, misplaced a wheel lug or bolt or scratched the outer lip of your two- or three-piece wheel, you'll know how difficult and irritating it can be to fix or replace.

Now TUNERSHOP offers outer lips and barrels for wheels such as Schmidt, OZ, BBS and other German split rims, center caps, hub centric rings, valve stems and stainless steel bolts.
- Go to TUNERSHOP Wheel Accessoires